2. Alpine Map Update
The navigation map update of your INE-W92xR should be supported by using a (Micro) SD card. This allows easy transfer of the map update to your navigation system INE-W92xR. During the update only
revised or new content will be transfered from the (Micro) SD card.
Requirements and limitations:
- Windows XP (SP 2) / Windows 7
- Micro SD card with minimum 4 GB recommended (INE-W920R / INE-W925R)
- SD card with minimum 4 GB recommended (INE-W928R)
1) Download <<MU_INE-W92xR_Synctool_xx_xx_xx.zip>> to your PC.
2) Connect an empty (Micro) SD card to your PC.
3) Extract the file (i.e. with WinZip / IZArc) onto the (Micro) SD card. The folder “autorun” needs to be in root directory of the (Micro) SD card.
4) Safely remove the (Micro) SD card from your PC.
5) Insert the (Micro) SD card into INE-W92xR.
INE-W920R / INE-W925R: Remove the detachable faceplate to access the Micro SD card slot.
INE-W928R: Open the display to access the SD card slot on the right hand side.
6) Apply the detachable faceplate (INE-W920R / INE-W925R) / Close the display (INE-W928R) and power the unit on by turning on the ignition.
7) Synctool starts up. Press the button “Collect device information”.
8) Press “Ok” once Update or Backup successfully completed without errors.
9) Press “Quit”.
10) Press “Yes” to quit synctool.
11) Remove the (Micro) SD card, then press “Continue”. INE-W92xR restarts automatically.
12) Connect the (Micro) SD card to your PC.
13) Click on the below link and follow the instructions on Naviextras.com website how to download and install Naviextras Toolbox.
https://alpine.naviextras.com/shop/portal/downloads
14) Start Naviextras Toolbox. The (Micro) SD card will be recognized as your Navigation device. Purchase and install content and updates as described within Naviextras Toolbox.
15) Safely remove the (Micro) SD card from your PC and insert it into INE-W92xR as described above. Power the unit on by turning on the ignition.
16) Synctool starts up. Press the button “Copy updates to your device”.
17) Press “Yes” to initialize the update.
18) Press “Ok” once Update or Backup successfully completed without errors.
19) Press “Quit”.
20) Press “Yes” to quit synctool.
21) Remove the (Micro) SD card, then press “Continue”. INE-W92xR restarts automatically.
