United Kingdom

PXA-H800 V1.110 / V2.110 Update

There are 2 different firmware versions. Please check the requirements below, before you start the firmware download process.

 

1. Firmware Version V1.110

  • When a non-Alpine Ai-NET compatible head unit is used

  • When one of the following Ai-NET compatible products is used: INA-W910R / IVA-W520R / IVA-D511R / IVA-D511RB / IVAW502R / IVA-W505R / IVA-W202R / IVA-W205R / IVA-D105R / IVA-D106R / IVA-D800R / CDA-117Ri / VPA-B211P / VPA-B222R

     

 

Download PXA–H800 Firmware (Version V1.110) - 258MB

(incl. RUX-C800 and Sound Manager for PXA-H800)

2. Firmware Version V2.110

  • When one of the following Ai-NET compatible head units is used: iDA-X301 / iDA-X301RR / iDA-X311 / iDA-X311RR / iDA-X305 / iDA-X305S / CDA-9884R / CDA-9885R / CDA-9886R / CDA-9887R / CDA-105Ri / DVA-9965R / iXA-W407BT / iXA-W404R

 


Download PXA-H800 Firmware (Version V2.110) - 258MB

(incl. RUX-C800 and Sound Manager for PXA-H800)

Introduction

This guidebook describes the procedure for updating the PXA-H800 software.

 

UG_PXAH800_ML.pdf (PDF 2.3 MB; EN, FR, ES, DE, IT, SV)

 

 

The fixes are:

  • Cancel residual DSP noise
  • Save System Settings in Preset after lost battery or disconnected Ai-Net
  • Improved Preset data back up and restore (Navi mix setting (ON/OFF), guidance mix levels and Imprint settings are stored in Preset)
  • Subwoofer level adjustment for older Ai-NET units
  • Higher woofer level for DD and dts
  • Higher level for Navi Mix
  • New Sound Manager Software
  • 64-bit compatible


Warning

Before proceeding with this update please ensure you have all sound settings saved.

All settings will be lost during this update.


Requirements

  • High Speed Internet connection

 

Update Instructions (the update procedure is the same for the firmware versions V1.110 / V2.110)

1. Download update file (.zip).

2. Extract downloaded file to your desktop.

3. Install "SoundManagerforPXA-H800Ver1110_setup.exe" OR "SoundManagerforPXA-H800Ver2110_setup.exe" on your computer.

4. Connect the PXA-H800 to your PC and start the Sound Manager Software.

5. Select "Option (O)" and then "PXA-H800 Software Download (M)".

 

6. Select OK.

 

7. Start the "Starting PRESET data backup" by clicking YES.

(All PXA-H800 data and settings will be saved on your PC. With this backup you can restore all data on PXA-H800 after the update.)

 

 

8. Click OK after the backup is completed.

 

9. Select extracted file “PXA-H800_v1110.bin” OR "PXA-H800_v2110.bin" and then click "Open".

 

10. The update will start automatically. This process takes approximately 10 minutes.

 

11. Once the update is completed follow the screen prompts.

 

12. When restarting the Sound Manager Software ensure that the PXA-H800 Version is changed to V1.110 OR V2.110

 

13. Your PXA-H800 update is completed.

14. If you have a RUX-C800, please follow the next steps for updating the RUX-C800 software.

15. Connect the PXA-H800/RUX-C800 to your PC and start the Sound Manager Software.

(If PXA-H800 is already updated with V1.110 OR V2.110 and RUX-C800 is connected, the error message "Version Error" will be displayed on RUX-C800.)

 

16. Select "Option" and then "RUX-C800 Software Download (F)".  

 

17. Select OK.

 

18. Select extracted file “RUX-C800_v1110.bin” OR "RUX-C800_v2110.bin" and then click "Open".

 

19. The update will start automatically. This process takes approximately 10 minutes.

 

20. Once the update is completed follow the screen prompts.

 

21. When restarting the Sound Manager Software ensure that the PXA-H800 and RUX-C800 Version is changed to V1.110 OR V2.110.

 

22. Your update is completed.